30 Seconds Indoor Mould Remover with fresh lemon scent

For use in bathrooms, laundries, kitchens to remove mould and mildew on most internal surfaces.

• 1 Litre Ready To Use
• Fresh Lemon Scent
• No Scrubbing Required

30 SECOND Indoor Mould Remover works on tile, grout, tubs, fibreglass, shower doors, vinyl cuirtains, counters, sinks, on wax floors, awnings, auto covers, boat covers and rubbish bins. Also for preparing surfaces for painting.

A quick & effective bleach based interior cleaner that is used to treat & remove mould & mildew from affected interior surfaces. Easy to use with no harsh scrubbing making it ideal for bathrooms, kitchens & laundries killing the mould spores thus minimizing re-growth. Leaves a crisp clean surface with a hint of fresh lemon scent in the air.

Why Use 30 Seconds Indoor Mould?

	Removes mould fast There’s no need to drag out a cleaning chore any longer than it needs to be. Our fast-acting solution means you get more done in less time!
	Pre-paint Preparation Can be used as a preparation for exterior paint, stain or varnish. Avoid cleaning untreated metals, aged powder coated surfaces, high gloss paintwork and fabric due to possible corrosive, dulling and bleaching effects.
	For indoor and outdoor use Suitable for indoor and outdoor use, when a smaller, ready to use option is required.

DIRECTIONS FOR USE:

• Read the on pack instructions & safety information before commencing the job or using the product
• Shake the container before using & spray directly onto the affected surface area
• Always test in an inconspicuous area for signs of colour fading & colour fastness
• If you are doing a large area work a small area at a time
• Product starts working after 30 Seconds but leave the product on for a minimum of 3-4 minutes. Time may vary depending on the surface & growth you are treating
• You will see mould or mildew change colour & dissolve
• You can scrub hard surfaces (grout, wall & floor tiles) with a stiff bristle brush to work the product in & loosen mould & grime
• Wipe delicate surfaces with a cloth to remove mould or mildew
• After recommended time rinse / wipe surface thoroughly with water
• Rinse overspray or spray drift from plant foliage - chemical action stops when product is dry
• Ready to use: No dilution required 1 litre trigger pack 30 Seconds indoor mould will cover up to 4sq metres per made up litre on porous surfaces & up to 10 sq metres per made up litre on non porous surfaces

SAFETY & CAUTIONS:

• Keep out of reach of children
• Do not allow contents or spray to come into contact with plants or animals
• If spray drift comes into contact with plants rinse off immediately
• Keep children & pets away for the area being worked while using the product
• Ensure the room you are cleaning is well ventilated
• Household gloves & protective clothing are recommended for prolonged use or if you have sensitive skin
• If product is being used on fabric or surfaces susceptible to dulling or bleaching test a small area first as it may cause discoloration
• Do not store container for prolonged periods in direct sunlight
• Store the container in an upright position in a cool dry & dark position
• Do not mix with acids ammonia, or other household chemicals

FIRST AID INSTRUCTIONS:

• If poisoning occurs seek medical advice or contact the National Poisons Centre in New Zealand on 0800-764756 or in Australia on 131126
• If swallowed DO NOT induce vomiting give a glass of water
• If skin contact occurs remove contaminated clothing & wash skin thoroughly
• In case of eye contact flush thoroughly with water